Back to jobs

Forward Deployed Controls Engineer (Engineer / Senior)

Pay
Pay not listed
Work setting
Remote — work setting source
Summary The Forward Deployed Controls Engineer commissions, tunes, and ramps Deterrence’s automated manufacturing equipment at production sites across our deployed footprint. This is a hands-on field execution role. You will be on site bringing equipment from installation through I/O checkout, SAT, and production ramp. You’ll adapt, debug, and optimize PLC, HMI/SCADA, robot, and safety code in the field, and you’ll feed lessons learned back to the core controls engineering team. Primary platforms are Siemens TIA Portal, Ignition SCADA, and FANUC robotics. The role is remote-based and requires 50% travel, often in multi-week deployments. We are hiring multiple engineers across levels, and scope and independence scale with level. Key Responsibilities
Listed location: Remote with travel
Read the full posting
Employment
Not stated

What you’ll work on

Full posting
  • Lead on-site installation, I/O checkout, system bring-up, and SAT for production equipment

  • Tune cycle times, motion, and process parameters to hit throughput, uptime, and quality targets

  • Modify and debug Siemens PLC programs and keep field changes under revision control

  • Adjust Ignition HMI/SCADA screens, alarming, and faceplates for site needs

  • Validate FANUC robot cells with PLC and safety controllers

From the employer’s posting
Lead on-site installation support, I/O checkout, system bring-up, and SAT for automated production equipment.
Ramp equipment to target throughput, uptime, and quality by tuning cycle times, motion, and process parameters.
Modify, debug, and optimize existing Siemens PLC programs in ST (SCL), LAD, FBD, and SFC, and maintain all field changes under revision control.
Adjust and extend Ignition HMI/SCADA screens, alarming, and faceplates to support operations and site-specific needs.
Integrate, touch up, and validate FANUC robot cells with PLC and safety controllers.

Before you apply

Work authorization
US citizens or permanent residents onlyApplicants must be a US person as defined in 22 CFR 120.62 (US citizen, lawful permanent resident, or protected individual) or be eligible to obtain any required authorization

What you’ll bring

All qualifications

Core experience

  • Bachelor’s degree in Electrical, Controls, Mechatronics, or a related engineering field, or equivalent experience.
  • Hands-on proficiency with Siemens TIA Portal, plus experience with Ignition or comparable SCADA.
  • Demonstrated experience commissioning and ramping equipment on a live production floor.
  • Ability to read and troubleshoot from electrical schematics and panel drawings.
  • Ability and willingness to travel 50%, including extended on-site deployments and occasional off-hours or weekend support during ramp.
  • Strong communication skills and comfort working directly with customer and site teams under schedule pressure.

Preferred experience

  • Experience ramping equipment against OEE, throughput, or yield targets.
Qualification wording
Bachelor’s degree in Electrical, Controls, Mechatronics, or a related engineering field, or equivalent experience.
Hands-on proficiency with Siemens TIA Portal, plus experience with Ignition or comparable SCADA.
Demonstrated experience commissioning and ramping equipment on a live production floor.
Ability to read and troubleshoot from electrical schematics and panel drawings.
Ability and willingness to travel 50%, including extended on-site deployments and occasional off-hours or weekend support during ramp.
Strong communication skills and comfort working directly with customer and site teams under schedule pressure.
Experience ramping equipment against OEE, throughput, or yield targets.
Education & alternatives
Qualifications - Bachelor’s degree in Electrical, Controls, Mechatronics, or a related engineering field, or equivalent experience. - Engineer: 2+ years · Senior: 5+ years in industrial controls, with significant field commissioning on production equipment.
Apply at Deterrence Defense

Posting record

Report an error

Actively hiringFirst seen by us 3 days ago, still listed, and not a repost of an earlier posting.

Status in our records
Live
First seen by us
Nov 18, 20263 days ago
Recorded sightings
4
Last seen by us
Nov 21, 2026
Employer says posted
Nov 13, 2026

These dates show when we found the posting. Check the employer’s website to confirm it is still accepting applications.

How this job compares

Time since we first saw it

Day 3

Similar jobs usually come down between day 3 and day 42.

From 633 similar postings that came down. Coming down is not always a hire.

Deterrence Defense is hiring

3 open jobs

Open jobs by the week we first saw them, last 12 weeks.

Hiring record

See how this role fits your experience

Add your resume to compare the role’s scope, tools and requirements with your experience.

Your next step

Complete your application on job-boards.greenhouse.io. The employer’s form will show what is required.

Applying through Greenhouse

  • No account needed: the form is one page, with an “Autofill my application” option that reads your resume.
  • Greenhouse doesn’t read resumes over 2.5 MB, or details placed in a header, footer, text box, table or second column. The file still attaches, but a recruiter has to type you in by hand.

Already applied? Track this application

Job description

View original posting ↗

Forward Deployed Controls Engineer (Engineer / Senior)

Remote (Southeast U.S. preferred) · 50% travel

Summary

The Forward Deployed Controls Engineer commissions, tunes, and ramps Deterrence’s automated manufacturing equipment at production sites across our deployed footprint. This is a hands-on field execution role. You will be on site bringing equipment from installation through I/O checkout, SAT, and production ramp. You’ll adapt, debug, and optimize PLC, HMI/SCADA, robot, and safety code in the field, and you’ll feed lessons learned back to the core controls engineering team. Primary platforms are Siemens TIA Portal, Ignition SCADA, and FANUC robotics. The role is remote-based and requires 50% travel, often in multi-week deployments. We are hiring multiple engineers across levels, and scope and independence scale with level.

Key Responsibilities

  • Lead on-site installation support, I/O checkout, system bring-up, and SAT for automated production equipment.
  • Ramp equipment to target throughput, uptime, and quality by tuning cycle times, motion, and process parameters.
  • Modify, debug, and optimize existing Siemens PLC programs in ST (SCL), LAD, FBD, and SFC, and maintain all field changes under revision control.
  • Adjust and extend Ignition HMI/SCADA screens, alarming, and faceplates to support operations and site-specific needs.
  • Commission and tune servos, VFDs, vision systems, sensors, and safety devices (ProfiSafe, fail-safe I/O).
  • Validate safety functions in the field against the design intent and applicable standards (ISO 13849, IEC 61508, ISO 10218).
  • Integrate, touch up, and validate FANUC robot cells with PLC and safety controllers.
  • Bring up and troubleshoot Profinet, OPC UA, Modbus TCP, and Ethernet/IP device networks.
  • Troubleshoot controls, network, and electromechanical faults to root cause on a live production floor.
  • Train site operators, technicians, and maintenance staff, and produce clear handoff documentation.
  • Capture field issues, punch lists, and design improvement recommendations, and feed them back to the core engineering team.

Qualifications

  • Bachelor’s degree in Electrical, Controls, Mechatronics, or a related engineering field, or equivalent experience.
  • Engineer: 2+ years · Senior: 5+ years in industrial controls, with significant field commissioning on production equipment.
  • Hands-on proficiency with Siemens TIA Portal, plus experience with Ignition or comparable SCADA.
  • Demonstrated experience commissioning and ramping equipment on a live production floor.
  • Working knowledge of machine safety standards and safety-rated motion.
  • Ability to read and troubleshoot from electrical schematics and panel drawings.
  • Revision control experience (GitHub, Siemens Project Server, or similar).
  • Ability and willingness to travel 50%, including extended on-site deployments and occasional off-hours or weekend support during ramp.
  • Valid driver’s license and the ability to travel domestically.
  • Strong communication skills and comfort working directly with customer and site teams under schedule pressure.

Level Expectations

Senior additionally runs commissioning for a full equipment line with minimal direction, serves as the lead controls contact for the site team, and mentors Engineer-level teammates.

Preferred Skills

  • FANUC robot programming (TP/KAREL) or FANUC certification.
  • Ignition Core Certification or higher.
  • ROBOGUIDE or other virtual commissioning tools for pre-deployment testing.
  • Brownfield retrofit and multi-vendor integration experience.
  • Industrial networking fundamentals (VLANs, managed switches, network diagnostics).
  • Experience ramping equipment against OEE, throughput, or yield targets.
  • Prior forward deployed, field service, or startup engineering experience.

Export Control. This position may require access to information controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be a U.S. person as defined in 22 CFR 120.62 (U.S. citizen, lawful permanent resident, or protected individual) or be eligible to obtain any required authorization.

Equal Opportunity. Deterrence Defense, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. We are committed to working with and providing reasonable accommodations to applicants with disabilities; if you need an accommodation at any point in the process, contact jobs@deterrence.com.

Demand for Forward Deployed Engineer roles

New Forward Deployed Engineer postings at the employers we follow are up 225% over the last 6 weeks compared with the 6 before.

Weekly new Forward Deployed Engineer postings at the same employers, from the week of August 17 to the week of November 9. The fewest in a week was 51, the most 267, and the latest week had 217.
August 17Last week

Each bar is one week of new postings. The darkest bars are the last 6 weeks.

Counted from the hiring pages we’ve followed for at least five weeks, so employers we add don’t look like growth. Updated weekly.

About the role

We file this job under Forward Deployed Engineer, by the work the posting describes.

Forward deployed engineers are placed with their employer's customers: they learn a customer's problem and write the code that makes the employer's product solve it inside the customer's own systems.

Postings ask for strong software engineering, most often in Python, ease with customers and their executives, often travel, and in about three of four cases work with large language models or AI agents.

An AI engineer or data engineer builds for their own employer's product team; a forward deployed engineer does similar work inside a customer. We give this role to every posting whose title says forward deployed.

Source details

View original posting ↗

Source notes

Source excerpts

Selected passages from the saved posting. Check the full description for conditions and exceptions.

Pay

No pay amount identified in the saved description.

Location & working pattern

Remote with travel

Forward Deployed Controls Engineer (Engineer / Senior) Remote (Southeast U.S. preferred) · 50% travel Summary The Forward Deployed Controls Engineer commissions, tunes, and ramps Deterrence’s automated manufacturing equipment at production sites across our deployed footprint. This is a hands-on field execution role. You will be on site bringing equipment from installation through I/O checkout, SAT, and production ramp. You’ll adapt, debug, and optimize PLC, HMI/SCADA, robot, and safety code in the field, and you’ll feed lessons learned back to the core controls engineering team. Primary platforms are Siemens TIA Portal, Ignition SCADA, and FANUC robotics. The role is remote-based and requires 50% travel, often in multi-week deployments. We are hiring multiple engineers across levels, and scope and independence scale with level. Key Responsibilities - Lead on-site installation support, I/O checkout, system bring-up, and SAT for automated production equipment. - Ramp equipment to target throughput, uptime, and quality by tuning cycle times, motion, and process parameters.
More source context
- Revision control experience (GitHub, Siemens Project Server, or similar). - Ability and willingness to travel 50%, including extended on-site deployments and occasional off-hours or weekend support during ramp. - Valid driver’s license and the ability to travel domestically.
Work authorization
- Prior forward deployed, field service, or startup engineering experience. Export Control. This position may require access to information controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be a U.S. person as defined in 22 CFR 120.62 (U.S. citizen, lawful permanent resident, or protected individual) or be eligible to obtain any required authorization. Equal Opportunity. Deterrence Defense, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. We are committed to working with and providing reasonable accommodations to applicants with disabilities; if you need an accommodation at any point in the process, contact jobs@deterrence.com.

Find answers in the posting

AI
How answers work

AI selects complete passages from this posting. Check them for conditions and exceptions.

Uses this posting and your question. No profile needed.